Cross-Cutting System KSS 400 - GB 110 V up to maschine no. 1014791

1 TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ 32 teeth, for fine cuts in wood	Ref. 092552
1 Guide track 400
1 Guide bow	Ref. 203208
1 Hose connector for chip extraction	Ref. No. 200042
1 Allen key 5 mm	Ref. No. 093034
1 Mains cable 4 m - GB 110 V	Ref. No. 087803

Image	description	Ref. No.
	Guide rail F 80 0,8 m (2,6 ft) long	204380
	Guide rail F 110 1.1 m (3.6 ft) long	204381
	Guide rail F 160 1.6 m (5.2 ft) long	204365
	Guide rail F 210 2,1 m (6,9 ft) long	204382
	Guide rail F 310 3,1 m (10,2 ft) long	204383
	Angle fence F-WA	205357
	Connecting piece F-VS for joining two guide rails	204363
	Guide pocket F 160 for guide rails up to 1,6 m	204626
	Guide pocket set 2 x F 160 + F-VS + 2 x F-SZ 180 MM + 1 guide pocket	204805
	Guide pocket set F 80 + F 160 + F-WA + F-VS + 2 x F-SZ 180MM + Guide pocket	204749
	End cap F-EK 2 pieces	205400

Image	description	Ref. No.
	Non-slip profile F-HP 6,8 M 6.8 m (22.3 ft.) long	204376
	Splinter guard F-SS 3,4M 3.4 m (11.2 ft.) long	204375
	Lever clamp F-SZ 180MM 2 pieces, for fixing guide rail to workpiece	207770
	Guide track ML max. cutting length 770 mm (30 5/16 in.)	204378
	Parallel guide fence with wing screws	203214
	Mushroom-shaped handle as additional machine guide, with fixing screw	201451
	Carrying case TK 785x320x285 mm, with insert	204240
	TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ AT, 32 teeth, for fine cuts in wood	092552
	TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.), AT, 16 teeth, for rip cuts in wood	092539
	Flexible hose FXS-L up to 3,2 m (10.6 ft) long	205276